Model

Isometric view of model

Side view of model



Side of vessel model



Bottom view of model

Developmental Work

Isometric View of Vessel

Orthographic View- front of vessel

Orthographic View- side of vessel

Orthographic View- top of vessel

SUPPLY LIST

Item	Description	QTY	Size	Remarks
1	Glue	1	16 oz	Titebond II wood glue (waterproof)
2	Sandpaper	2	4”x8” sheet	Material forming
3	Clear Wood Finish	1	1 gallon	Vessel finish

TOOLS AND EQUIPMENT LIST

Item	Description	Use
1	Band Saw	Cut out pieces for vessel
2	Ruler	Measure out pieces for vessel
3	Pencil	Mark wood for vessel

MATERIALS LIST

Item	Description	QTY	Size	Remarks
1	Plywood	1	2’x4’ sheet	Vessel body
2	Plexiglass	1	4”x6” sheet	Vessel bottom
3	Motor	1	Standard
4	Battery	1		Power source of vessel

 

Plan of Procedures
The project being created following these steps is a remote control glass bottom vessel.  This vessel will be able to be operated from shore during harsh weather to view underwater benthic creatures. 

·         Measure out and mark the wood to the appropriate sizes for the pieces of the vessel

·         Cut each piece of wood following your measured out guide lines and sand the edges of each piece so that the edges are smooth

·         Glue the side pieces of wood together

·         Glue the bottom frame to the bottom of the side piece of the vessel

·         Let the glue completely dry for at least 24 hours

·         Paint the clear wood finishing over the entire vessel

·         Let the vessel completely dry for at least 24 hours

·         Glue in the sheet of pexiglass to the center of the bottom of the vessel

·         Let completely dry for at least 24 hours